next up previous contents
Next: 2 mm Receiver Up: Receivers Previous: 3 mm Continuum

3 mm SIS receiver

(tuning band: 85 - 116 GHz).

This receiver has been equipped with a new Nb junction mixer in August 1992. Its performance on the telescope is summarized in Fig. 1. The SSB receiver temperature is 110K at 115 GHz, and 70--140 K below 100 GHz with a few strong resonances towards the lower end of the tuning range. Note that the IF frequency of this receiver is 1.5 GHz, and not 3.9 GHz as for the 1.3 mm and 2 mm receivers. When tuned to the CO 115.27 GHz line in the LSB, the oxygen 118.75 GHz falls in the USB; this has two consequences for the observations: i) the sky seen in the USB is warm, leading to an increase of the system temperature, and ii) the atmospheric opacity in the LSB, calculated by OBS/ATM, can be quite wrong if the assumed gain in the USB (GAINi) is poorly known. It is therefore advantageous to use a large (>10 dB) USB rejection. We intend to replace the present mixer with a new one of comparable or better temperature and allowing higher USB rejections.

It is important to check your calibration on strong reference sources (see IRAM line catalog and updates [1, 10, 15]). Beware also of possible interference between the `second' 1.3 mm receiver, 230G2, and this receiver when operating at harmonic frequencies (the two receivers receive the same polarization; the interference will be a strong and narrow line).

Robert Lucas
Thu Mar 9 14:51:14 MET 1995